5 Steps – No More Area Rug Wrinkles, Buckles and Bunching

5 Steps to Area Rug Behavior – No More Wrinkles, Buckles and Bunching ever again

Your new area rug can be a joy or a nightmare. Here are 5 steps to Area Rug Behavior. 5 tips to help you rid yourself of wrinkles, buckles and bunching forever.

  1. Buy a Decent Area Rug

Area Rugs are often bought as an impulse item. When you need a rug to accent your décor or to cover an ugly spot, don’t give in to the temptation of buying a chain store special, based on color and price only. An area rug should be a well thought décor item, not a cheap after-thought. You don’t have to break the bank. Most good quality wool fiber rugs are available in style and qualities that will fit most any budget. Fine quality wool fiber area rugs can be purchased Online and shipped right to your front door for about the same price as those chain store pretenders.

  1. Buy a New Zealand Wool Fiber Area Rug

Wool Fiber that has been shorn from New Zealand sheep is the best fiber for an area rug. Why a New Zealand sheep? Because they have been bred to produce “carpet quality” wool fiber. An area rug of New Zealand wool fiber will be soft on the feet and extremely durable. Most stains are not a problem; simply blot gently with clear warm water for best results.

  1. Make sure it is at least 12mm or More- pile density

An area rugs density will play an important role in its life and performance. A flimsy cotton or olefin (polypropylene) rug or a runner without a secondary backing is nothing but trouble. A rug without sufficient density will wrinkle, warp, buckle and bunch. Not to mention the battle for possession that takes place when you try to vacuum it. The vacuum almost always wins this battle as you try using your feet to keep it under submission and out of the suction tube. I don’t know anyone who enjoys constantly adjusting and straightening their rugs. If you buy a rug with sufficient pile density (or weight) it will remain where you place it and behave when you vacuum. I prefer rugs of at least 12mm. Especially if they are to be placed over wall-to-wall carpet. Buy a dense rug and let gravity keep it in position and under control.

  1. Cotton or Jute Backing is preferred

Although cotton or jute backing is preferred, many rugs are manufactured with a secondary backing. I prefer rugs that are woven without the secondary backing. Because you can tell if it’s a good quality rug when you can detect the pattern of the rug while looking at it from the back. Whether a rug is machine-made or hand-knotted it has to be woven into something. Cotton or jute is preferred, but polypropylene mesh is fine when used in the backing of a rug (but never the face fiber). However; some rugs need that secondary backing to add density and weight. Also consider how the are rug is bonded. Single backed area rugs only need a small amount of latex to keep them bonded while secondary backing rugs need more latex to secure the backing material. If the rug maker uses synthetic latex for bonding, your nose will be happy. It will only have a new rug smell for a short period of time. If your rug maker uses a lot of real latex to secure a secondary backing, it will most likely stink of burnt rubber for years to come. Especially when the weather gets hot. Most noses and eyes are sensitive to real latex in larger doses. If you have chemical sensitivities, stick to single backed area rugs that don’t use heavy applications of synthetic latex.

  1. Don’t place Heavy Furniture on your Area Rugs

Area rugs are often intended to define and delineate space. If your rug is too big for the area you are decorating you will be tempted to tuck the edges of the rug under your heavier pieces of furniture. When heavy furnishings are placed on an area rug they can often cause bunching and wrinkling where the furniture legs are indenting their selves into your rug. This can cause the most beautiful and expensive rugs to look cheesy and warped. Indents, wrinkles and warping of rugs from heavy furnishings can also become more permanent. To avoid costly rug repairs down the road, keep four to six inches of distance from heavy furniture. (Coffee tables are fine; sofas, hutches and entertainment systems are a definite no-no). Although not often. Some rug applications may result in the need for a dense and firm rug pad (or cushion). I always suggest the use of all-felt or synthetic all-felt rug pads.

Avoiding the hassles of wrinkles, buckles and bunching in your area rug is as easy as pie when you consider applying these 5 tips. Your new area rug can be a joy or a nightmare. Always buy good quality (not museum quality) New Zealand wool fiber area rugs with a single woven and bonded cotton or jute backing, and never place it under any heavy furniture. Follow these rules and your new area rug will be a joy for many years to come. Visit our web site for more area rug and home décor items and information.

Charles Beason

www.RugRunnerBiz.com

Hey, Would you like to Earn some Extra Cash simply sharing Great prices on Dish Satellite? 

 -Click Here-

or visit www.AffiliateMagic.webs.com

Advertisements

About Charles Beason

Flooring Consultant/ Estimator, Bi-vocational Pastor of Oasis Missionary Baptist Church, Internet Business Owner, Webmaster.

Posted on April 22, 2009, in Area Rugs, Flooring and Home Design, Q&A, Info, Tips. Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: